Showing 33–48 of 49 results
Upgrade your FX rifle with the 480cc Carbon Fibre Air Bottle. This lightweight tank gives you a much higher shot count without the front-heavy bulk of standard aluminium cylinders. It features a built-in valve for easy installation – letting you spend more time shooting and less time refilling.
The Gamo 310 bar PCP air compressor for filling your air rifle pressure tube or pressure bottle up to a maximum of 600 cc.
The 12 V DC, 110 V-AC or 220 V AC connection makes it possible to use the compressor at home or on location with the 12 volt adaptor to attach it to your cars battery.
Make sure you select the correct voltage on the compressor before you plug it in!.
The low noise compressor can fill up to a pressure of 310 bar. It works with an oil-free lubrication system which makes it a very low maintenance model.
The maintenance sequence is well described in the user manual.
The automatic shut-off can be adjusted so the compressor shuts off when the desired pressure has been reached.
The compressor has a manual water and oil seperator.
Important note: The Gamo air compressor can only be used for filling your airrifle pressure tube or pressure bottle. It cannot be used for breathing air cylinders or scuba cylinders
Indication of filling time
IMPORTANT:
THIS PRODUCT IS DESIGNED TO FILL PRE-CHARGED PCP AIR GUNS AND PAINTBALL GUNS DIRECTLY.
DO NOT EXCEED MAXIMUM FILL PRESSURE OF YOUR BOTTLE AT ROOM TEMPERATURE. ONLY FILL BOTTLES THAT ARE IN GOOD CONDITION AND ARE IN DATE OF INSPECTION.
IMPORTANT READ ALL INSTRUCTIONS BEFORE USE. TO PROTECT YOURSELF YOU SHOULD ALWAYS WEAR SAFETY GLASSES AND EAR PLUGS WHEN OPERATING THIS COMPRESSOR.
The Hill EVO 310 Electronic Compressor is reliable and durable and the new EVO version has introduced improvements and new features.
The Evo benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by their own software and electronics engineers.
The Evo also benefits from the built in Automatic Pressure Gauge kicks in whenever the motor on the compressor stops, so when it goes into a cooling cycle and when a fill is paused or finished. This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit. This is very important for people filling larger rifles and or cylinders.
Hill EVO 310 Electronic Compressor Features:
| Count: | 150 |
| Caliber: | 5.5mm (.22) |
| Design: | Diabolo |
| Weight: | 1.85 gram (28.55 grain) |
| Length: | 9.1mm |
| BC: | TBA |
The Bluetooth Electronic Board for the Morini CM162EI Air Pistol is a high-tech part for competitive shooters. It uses an ARM Cortex processor, gyroscope, and accelerometer to track your performance. You can connect the pistol to the “Morini Competition Arm SA” app via Bluetooth to monitor your training. This app works on both Android and Apple devices. Remember, only Version 3.0 of the board is compatible with the app.
If you need a Bluetooth electronic board for the Morini CM162EI air pistol, visit Airgun Depot to get it today.
Morini Bluetooth Electronic Board for CM 162EI Air Pistol
The Morini CM162 Cylinder is a direct replacement air cylinder for the 162EI and 162MI PCP air pistols. The cylinder is equiped with an analog pressure gauge that fills to 200 BAR max operating pressure and features shot peening to help extend the service life of the components. Grab yourself a spare cylinder for your Morini 162EI and 162MI air pistol from Airgun Depot.
Morini CM162 Analog Cylinder, Red
Looking for the perfect cleaning kit for your air rifle? Look no further than Napier’s Airgun Pull Through Kit! Our kit contains everything you need to effectively clean any type of air rifle, making it suitable for both .22 and .177 calibres.
Our kit features a strong coated cable with a soft flexible loop that is passed through the barrel of your air rifle. Simply attach a pre-cut Rifle Clean patch and pull back through the gun, repeating the process until all traces of fouling are removed. It’s that easy!
Scroll down to watch the video below for detailed instruction on how to use the Power pull through kit.
The Napier Airgun Pull Through Kit comes complete with 100 Power pull through patches, ensuring you’ll have plenty on hand for multiple cleanings. Our kit also includes 1 x 120ml Power Airgun oil Pump Spray, which contains exactly the same amount of active ingredient as the 200ml Aerosol version.
With the Napier Pull through tool and easy-to-follow instructions, you’ll have everything you need to get your air rifle clean and functioning at its best. Plus, the kit comes with a convenient component case, making it easy to store and transport.
So, whether you’re a seasoned airgun enthusiast or just starting out, the Napier Airgun Pull Through Kit is the perfect choice for keeping your air rifle in top condition. Don’t settle for anything less than the best – order your kit today and experience the benefits for yourself!
Kit Contains:
1 x 120ml Power Airgun oil Pump Spray (This contains exactly the same amount of active ingredient as the 200ml Aerosol version)
100 x Power pull through patches
1 x Napier Pull through tool
Instructions and component case
The Reximex Extra Capacity Carbon Fibre Buddy Bottle is configured for the Reximex rifles.
Fitted with a Completely New Best Fittings Custom Designed and Built Valve, the bottles are moved forward just enough to clear any obstructions within the tight space available.
Please note, this valve is only suitable for model variants with a visible O-Ring on the male connection point on the gun. Some model variants feature an O-Ring inside the bottle valve instead, in which case this valve will not be compatible.
Reximex Extra Capacity Carbon Fibre Buddy Bottle 300cc Specifications:
Reximex Extra Capacity Carbon Fibre Buddy Bottle 500cc Specifications:
Design Life – 15 Years
15 Year Design Life is typical of the vast majority of composite cylinders available for use in the UK/EU.
5 Year cylinder hydro-static test cycle from date of manufacture. Only required if you are having the bottle commercially re-filled.
Cylinder Decommission Date:
15 Years from Manufacture Date detailed on the cylinder.
Decommission date refers to the last date that the cylinder can be filled at a commercial fill station. You can safely continue to use the cylinder after this date until the air is depleted, it just cannot be commercially re-filled.
As we send this item with Parcelforce, it will be sent empty of air. If you wish for it to be sent full, we can offer home delivery for £20.00. Please contact us if you wish us to deliver a full bottle.
This Steyr Double Cone compensator reduces turbulence and is suitable for Steyr air rifles with calibre 4.5 mm with 16 mm barrels.
Ensure flawless performance for your Steyr H5 air rifle with the genuine Steyr H5 magazine.
Designed for 5 quick, reliable shots, it features patent-pending sealing and a bounce-free system for consistent feeding.
Crucially, its design ensures no projectile remains in the weapon after removal, enhancing safety
Steyr magazine suitable for the Steyr Pro X and Pro X Scout rifles.
10 Shot
Theoben Rapid Extra Capacity Carbon Fibre Buddy Bottle allows direct fitment to your Theoben Rapid Mk1 / Mk2 without any modifications to the fore-end of the stock or the action. (Not for MFR)
Theoben Rapid Extra Capacity Carbon Fibre Buddy Bottle Specifications:
Design Life – 15 Years
15 Year Design Life is typical of the vast majority of composite cylinders available for use in the UK/EU.
5 Year cylinder hydro-static test cycle from date of manufacture. Only required if you are having the bottle commercially re-filled.
Cylinder Decommission Date:
15 Years from Manufacture Date detailed on the cylinder.
Decommission date refers to the last date that the cylinder can be filled at a commercial fill station. You can safely continue to use the cylinder after this date until the air is depleted, it just cannot be commercially re-filled.
As we send this item with Parcelforce, it will be sent empty of air. If you wish for it to be sent full, we can offer home delivery for £20.00. Please contact us if you wish us to deliver a full bottle.
IMPORTANT NOTE:
Our cylinders are CE marked and are type approved for use in the UK and European Union.
The Walther RM8 Extra Capacity Carbon Fibre Buddy Bottle is a 300cc bottle configured for the Walther RM8.
It’s 11g lighter than the steel OEM Bottle and 50% more shots!! Simply unscrew your old bottle, replace with the new, then fill. No need to remove the action from the stock.
Walther RM8 Extra Capacity Carbon Fibre Buddy Bottle Specifications:
Diameter – 54mm +/-1.5mm.
WP (Working Pressure) – 300 BAR
TP (Test Pressure) – 450 BAR
Length including valve – 280mm
Design Life – 15 Years
15 Year Design Life is typical of the vast majority of composite cylinders available for use in the UK/EU.
5 Year cylinder hydro-static test cycle from date of manufacture. Only required if you are having the bottle commercially re-filled.
Cylinder Decommission Date:
15 Years from Manufacture Date detailed on the cylinder.
Decommission date refers to the last date that the cylinder can be filled at a commercial fill station. You can safely continue to use the cylinder after this date until the air is depleted, it just cannot be commercially re-filled.
As we send this item with Parcelforce, it will be sent empty of air. If you wish for it to be sent full, we can offer home delivery for £20.00. Please contact us if you wish us to deliver a full bottle.
IMPORTANT NOTE
Our cylinders are CE marked and are type approved for use in the UK and European Union.
Western Airguns Bullet Press Die Flat Base: The Ultimate Precision Tool for Consistent, High-Performance Airgun Ammunition Crafting top-tier ammunition requires discipline, precision, and unwavering consistency. Enthusiasts at every experience level understand that reliable performance begins long before a projectile leaves the barrel. That’s why a growing number of makers rely on the Western Airguns Bullet…
WhatsApp us