50 Cal Slugs For Bintac T50 (100 count)
€30.00Compatible with:
- Bintac T50 (.50 cal)
Specifications:
- Weight: 210 Grain
- Caliber: .495
Showing 1–16 of 19 results

Compatible with:
Specifications:

With the AEA 480 bar compressor, filling your air reservoirs is a breeze. As the name suggests, it can handle a filling pressure of up to 480 bar. The AEA 480 bar compressor is incredibly user-friendly. It comes with an A/C cable and jumper cables. Using the A/C cable, you can connect it to a wall socket with 230 Volts 50 Hz, and with the jumper cables, you can connect it to a 12 Volt car battery. This makes it convenient for refilling your air reservoirs even when you’re away from home.
The AEA 480 bar compressor features a large switch on the front with a sticker above it indicating the purposes of position 1 and position 2.
Set the switch to the correct position and adjust the desired filling pressure on the display. Just below the display are four buttons: a SET button, an ON/OFF button, a plus button, and a minus button. These buttons are all you need to operate the AEA 480 bar compressor. The ON/OFF button is self-explanatory. With the SET button, you adjust the displayed values:
Once all the values are displayed to your preference, you’re almost ready to start filling an air reservoir. You only need to set the correct filling pressure. Hold the plus and minus buttons for 3 seconds to adjust the pressure. Then, press the plus button to increase the pressure or the minus button to decrease it. Attach the hose, which is clamped at the top, to the air reservoir and press the ON/OFF button to start the AEA 480 bar compressor.
It operates swiftly, and with the built-in auto-stop function, you can work as safely as possible. The display also shows the temperature and the duration of the current filling session. When the compressor reaches a temperature of 35°C/95°F, the fan will automatically turn on and remain on until the temperature drops below 30.2°C/90°F. If the compressor gets warmer than 71°C/160°F, it will automatically shut down to cool off.
There is a vent valve on the side of the AEA 480 bar compressor to release any moisture filtered from the air used. This model is entirely oil-free, which significantly reduces maintenance.
IMPORTANT NOTE:
Never exceed the factory adviced fill pressure of your air rifle and your filling equipment!
Since this compressor’s maximum filling pressure is 480 bar and the average air rifle fill pressure is between 200 and 300 bar, it’s crucial to check the maximum fill pressure of your air reservoir and your air filling equipement like fill hose, quick connnect adapters etc so you will never exceed the maximum fill pressure of the weakest part of your fill line.
Set this maximum fill pressure correctly on the AEA 480 bar compressor before using it.


The RAM Air-X Compressor is a professional high-pressure compressor, specially designed for filling HPA tanks and PCP airguns. Its robust construction ensures reliable performance, making it ideal for intensive use with both airsoft HPA systems and PCP rifles.
The Air-X features a powerful motor that efficiently compresses air to the high pressure levels required for HPA and PCP applications. Its multi-stage compression system compresses air step by step, providing optimal filling performance while minimizing heat buildup. With a maximum working pressure of up to 300 bar, this compressor can fill nearly all rifles.
The compressor comes with a female Foster connector for direct attachment to HPA tanks and PCP cylinders with a Foster fitting.
Don’t have a Foster connection? An adapter is available: 1/8 BSP female – Foster male.
The control panel displays the current pressure during filling, allowing precise monitoring of when the desired pressure is reached. Safety features include overpressure protection and automatic shutdown in case of overheating. It is also compatible with standard filling hoses and Foster-type quick connectors.
The Air-X Compressor is ideal for airsofters who want to fill their HPA tanks themselves, PCP shooters without access to a filling station, and clubs looking for a reliable filling solution. Technicians and hobbyists who frequently work with high-pressure systems also benefit from the freedom to operate independently of external filling points.

Customise your Katran rifle with these beautiful AirMaks Katran stocks.

Customise your Krait rifle with these beautiful AirMaks Krait stocks.
Comes with corresponding cheek piece.
Will not fit Krait Lite models.

| Caliber: | See drop down menu |
| Length: | 700mm liner. Housing is longer |
| Twist rate: | |
| Weight: | N.a.v. |
| Extra: | Pellet probe included |

| Caliber: | See drop down menu |
| Length: | 700mm liner. Housing is longer |
| Twist rate: | |
| Weight: | N.a.v. |
| Extra: | Pellet probe included |

The brand new BSA PCP 300 Bar Electric Compressor comes with a power lead and plug to allow use in a domestic socket in your own home as well as grips which can connect to a standard car battery too!
This makes the BSA PCP 300 Bar Electric Compressor easy and portable so you can use anytime and anywhere. All you have to do is plug it into your PCP and turn it on- as easy as that! The pump has a gauge set to help show you the desired fill volume which automatically stops to avoid overfilling. The compressor comes with a spare kit. Please Note: standard filler probes can be used via a quick fill which is not included with the compressor.
FREE DELIVERY
BSA PCP 300 Bar Electric Compressor Features:


The New Daystate Type 2 MCH6 Compressor is manufactured by Coltri and is one of the smallest and lightweight breathing air compressors. It is easy to handle it and is ideal for charging of BA diving cylinders or for paint ball and other leisure activities as well as a variety of industrial applications.
All MCH6 units have a charging rate of 100 L/min (3.5 CFM), capable of filling a 10 Litre cylinder from empty to 200 bar in 20 minutes. Technically advanced, but simple and economical to use, these features mean that you can use this electric driven diving compressor even in your own home.
The MCH-6 is designed for filling a single cylinder. It’s neither designed nor intended for filling cascade storage systems of any kind.
Stainless Steel Interstage Coolers & After Coolers
Daystate Type 2 MCH-6 Compressor Specifications:
Pumping Capacity: 100l/m–6,00 m³/h–3.53 CFM FAD
Filling Time:20 min.
Noise: 91db
Weight: 57.1kg
Dimensions: 470 x 730 x 370mm

The Gamo 310 bar PCP air compressor for filling your air rifle pressure tube or pressure bottle up to a maximum of 600 cc.
The 12 V DC, 110 V-AC or 220 V AC connection makes it possible to use the compressor at home or on location with the 12 volt adaptor to attach it to your cars battery.
Make sure you select the correct voltage on the compressor before you plug it in!.
The low noise compressor can fill up to a pressure of 310 bar. It works with an oil-free lubrication system which makes it a very low maintenance model.
The maintenance sequence is well described in the user manual.
The automatic shut-off can be adjusted so the compressor shuts off when the desired pressure has been reached.
The compressor has a manual water and oil seperator.
Important note: The Gamo air compressor can only be used for filling your airrifle pressure tube or pressure bottle. It cannot be used for breathing air cylinders or scuba cylinders
Indication of filling time
IMPORTANT:
THIS PRODUCT IS DESIGNED TO FILL PRE-CHARGED PCP AIR GUNS AND PAINTBALL GUNS DIRECTLY.
DO NOT EXCEED MAXIMUM FILL PRESSURE OF YOUR BOTTLE AT ROOM TEMPERATURE. ONLY FILL BOTTLES THAT ARE IN GOOD CONDITION AND ARE IN DATE OF INSPECTION.
IMPORTANT READ ALL INSTRUCTIONS BEFORE USE. TO PROTECT YOURSELF YOU SHOULD ALWAYS WEAR SAFETY GLASSES AND EAR PLUGS WHEN OPERATING THIS COMPRESSOR.

The Hill EVO 310 Electronic Compressor is reliable and durable and the new EVO version has introduced improvements and new features.
The Evo benefits from completely new electronic architecture along with completely new software, as with all Hill products the electronics have been designed and tested in house by their own software and electronics engineers.
The Evo also benefits from the built in Automatic Pressure Gauge kicks in whenever the motor on the compressor stops, so when it goes into a cooling cycle and when a fill is paused or finished. This not only takes the strain off the motor when starting again against very high pressures, but has the added benefit of purging the air, including any moisture from inside the unit. This is very important for people filling larger rifles and or cylinders.
Hill EVO 310 Electronic Compressor Features:

| Count: | 150 |
| Caliber: | 5.5mm (.22) |
| Design: | Diabolo |
| Weight: | 1.85 gram (28.55 grain) |
| Length: | 9.1mm |
| BC: | TBA |

This Steyr Double Cone compensator reduces turbulence and is suitable for Steyr air rifles with calibre 4.5 mm with 16 mm barrels.

Ensure flawless performance for your Steyr H5 air rifle with the genuine Steyr H5 magazine.
Designed for 5 quick, reliable shots, it features patent-pending sealing and a bounce-free system for consistent feeding.
Crucially, its design ensures no projectile remains in the weapon after removal, enhancing safety
WhatsApp us